"Skylight" LED lighting Kit for the Dillon 550 Press LED lighting system for the 550.....perfected. This Patent pending reloading press LED lighting system consists of a machined bushing with an embedded high output LED pod which installs into the center hole of the toolhead. Super bright, straight down focused light, out of the way, no heat and does the job perfectly. Also fits the RL 450 Caliber changes are quick and easy, just pick it up, change the toolhead, drop it back in and get back to work. 550 Skylight systems are equipped with strain relief and "drop in" installation for quick, easy toolhead swaps. "Skylight" LED lighting Kit for the Dillon 650 750 Press The Skylight kit for the Dillon 650/750 has a machined bushing with an embedded high output LED pod that installs into the center hole of the toolhead, additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame. Super bright, , out of the way, no heat and does the job perfectly. Caliber changes are quick and easy, just pick it up, swap your toolhead, drop it back in and get back to work. "Skylight" LED lighting Kit for the Hornady Lock n Load AP Press The Skylight kit for the Hornady LNL AP features a machined bushing with an embedded high output LED pod that drops into the center hole of the toolhead. Additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame. Super bright, , out of the way, no heat and does the job perfectly. "Skylight" LED lighting Kit for the Dillon RL & Super 1050, 1100 & CP 2000 The Skylight kit for the Dillon 1050 has a machined bushing with an embedded high output LED pod. It is installed into a custom, black anodized bracket for the 1050 which mounts on the toolhead under the die of your choice. It can be rotated to throw the light just where you want it. Super bright, , out of the way, no heat and does the job perfectly. "Skylight" LED lighting Kit for the Dillon square deal B The Square Deal doesn't have much real estate available to attach a lighting system to that doesn't get in the way. Tricky, but here is our solution and it works great! "Skylight" LED lighting Kit for the Forster Co-Ax Two low profile 2"long High output led strips light up your Co-ax so you can see every detail of what is happening on your press. Comes with everything you need, including 110 wall adapter with 48" long cord, on/off switch, prep kit & adhesive anchors for wire routing. Note: This kit does not work with the new Forster quick change jaws. "Skylight" LED lighting Kit for the Hornady 366 Shotshell press Perfect accessory for your shotshell press! A high output cluster of LED's sit in a machined bushing which in turn drops into the unused center hole of your 366. No shadows, no hot, bulky desk lamps. Just cool, bright, white light. "Skylight" LED lighting Kit for the Hornady IRON press Two low profile 2" long Hi output led strips light attach to the insides of the press frame so you can see every detail of what is happening on your press. "Skylight" LED lighting Kit for the LEE Loadmaster The Skylight kit for the LEE Loadmaster features a machined bushing with an embedded high output LED pod that drops into the center hole of the toolhead. Additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame. Super bright,high output, out of the way, no heat and does the job perfectly. Average lifespan is 75,000 hours. Few things are more comforting than pure, bright white light, to be able to see everything in motion on your shellplate and verify your powder charge without having to strain your eyes or fight the shadows. These systems are one of the best upgrades you can do to increase your enjoyment and comfort while reloading. Ceiling Dual LED Shellplate Lighting System Complete LED kit with "Ceiling" option. Perfect for the RCBS Pro2000, RCBS Rockchucker, LEE loadmaster, Hornady LNL AP, and many more. This Patent Pending kit includes, power supply with 48" long cord, on\off switch, "Y" adapter, (1) 4" LED w\quick connect, (1) 2" LED w\quick connect, prep kit and wire routing anchors. This kit is for presses (Like the Hornady Lock N Load and the Dillon 650) that have enough room at "ceiling" to install the 2" light in a downward fashion to flood the shellplate with even more light. Plenty of bright, white light with-out being too much. Standard Universal LED Shellplate Lighting System Perfect for any "O" frame press, Rockchucker, lyman, LEE, Redding, etc. Also, LEE turret, Redding T-7 and many more. If you have 4" of available space to install it on your press, you are good to go! Hi intensity LED systems put the light right where you need it......inside the cage of your reloading press. Super thin 6 LED profile attaches to the inside of the upright of your press and floods the shellplate and your cases with light. Double checking powder level before setting each bullet is an important safety step and now becomes easier than ever before. I will let the photos speak for themselves. Also comes with 2 self-adhesive wire routing anchors & prep kit. The LED strip comes with an aggressive adhesive installed on the back to attach to your press. All you gotta to do is prep the area, clean the area with alcohol, stick it on, plug it in and get to work! Included The system comes complete with a 110 plug in adapter with 48" long cord, on/off switch prep kit and wire routing anchors. Long Lifespan Average lifespan for Skylight LED is 75,000 hours. Long Lifespan Average lifespan for Skylight LED is 75,000 hours.